- Weekly Sales
- Anchor & Dock
- Anodes
- Auto Pilots
- Bandit Reels and Longline Equipment
- Baskets - Galvanized & Plastic
- Bennett Trim Tabs
- Bilge Pumps
- Blocks
- Boiling Pots, Burners, and Regulators
- Books
- Boots
- Brass Pipe Fittings
- Cable (Stainless Steel)
- Cast Nets
- Cleaners, Degreasers, Rust Inhibitors, etc.
- Coast Guard Required Equipment
- Controls and Control Cable
- Crab Nets
- Crab Pot Haulers
- Crab Traps, Crab Wire, and Supplies
- Crawfish Nets and Crawfish Traps
- Cutless Bearings
- Deck Hatches, Deck Plates, etc.
- Dip Nets, Shrimp Rakes, Shovels, Scoops, etc
- Engines
- Exhaust Hose, Pipe, and Fittings
- Eye Bolts
- Facemask
- Fiberglass Supplies
- Filters: Fuel, Lube, Coolant, etc.
- Fishing Hooks (Addya)
- Fishing Hooks (Mustad & Eagle Claw)
- Floats (Corks)
- Fuel Tanks, Fuel Fittings, etc.
- Gauges
- Gloves
- Hat Hooks
- Heat Exchangers (Oil Coolers)
- Hoop Nets, Slat Trap, Hoops, etc.
- Hydraulic Pumps, Clutches, and Brackets
- Hydraulic Valves
- Impellers
- Knives and Sharpeners
- Lasdrop Dripless Shaft Seals
- Leads
- Lights
- Lure Hair
- Monofilament Line
- Motor Mounts
- Motors Electric
- Motors Hydraulic
- Other
- Oyster Dredges
- Packing Boxes
- Paddles and Push Poles
- Propellers (Michigan Propellers)
- Propellers (Outboard & Sterndrive)
- Propellers (ZF)
- Pumps
- PYI PSS Shaft Seals
- Rainwear and Aprons
- Rollers
- Rope
- Rudder Ports
- Scales
- Seafood Utensils, Tools, and Attachments
- Shackles
- Shaft Couplings
- Shafts
- Stainless Steel Hardware and Rigging
- Steering (Hydraulic)
- Steering (Manual)
- Steering (Power Steering)
- Strainers
- Strut Hubs (Stainless Steel)
- Switches
- Swivels, Sleeves, Snaps, etc.
- Thru Hulls
- Tiller Arms
- Trailer Parts
- Traps
- Trawls, Boards, Pull Ropes, etc.
- Trolling Motors
- Twine
- VHF Radios and Antennas
- Winches - Hydraulic & Electric
- Windshield Wipers and Motors
- Zippers
|
|
Shackle Bodies Are Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
C-419-G Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 ”Rigging Hardware”. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
Certification Available Upon Request
6 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel
DO NOT EXCEED THE WORKING LOAD LIMIT
| |
|