PYI 3″ Carbon Stator with Hose Barb


Item Number: 07-300-2B

Manufacturer Part No: 07-300-2B


A carbon stator is connected to the rubber below and ‘floats’ around the shaft. The face of the carbon is finished to a flatness of 4 helium light bands and provides a water tight seal when pressed against the stainless steel rotor.

The high density, resin impregnated carbon/graphite stator is a space age composite that is first mixed, molded and then formed under pressure. The blanks are then baked, machined and lapped. The face of our carbon is finished to a flatness of 4 helium light bands (measured .000044″ of variation over entire lapped surface). The grade of carbon used in the PSS has an operating temperature over 500° Fahrenheit (+260° Celsius), and cannot melt if the seal runs dry, unlike a rubber lip seal or plastic face seal. The high density of the carbon greatly increases the longevity and wear resistance. Several commercial vessels have recorded over 40,000 (over 4-1/2 years of continuous operation) engine hours on the same, original components. The carbon should not need to be replaced under normal operating conditions.

Additional information

Weight 1.22 lbs
Dimensions 6 × 6 × 2.38 in


There are no reviews yet.

Be the first to review “PYI 3″ Carbon Stator with Hose Barb”

Your email address will not be published. Required fields are marked *

nine + 7 =